image


How to connect to DYMO label Printer via USB and its usage With DolphinPOS APP?

(DYMO, Model: 450)


May-29-2020, Version 1.0


Contact information: support@dolphinpos.com


Index

Page#

DYMO 450 Printer setup

2-4

Download Inventory from Owner Portal

5-6

Label Printing

7-14

Printer Setup

Step 1: On the Host PC, where you want to print the label, install the latest software for DYMO from below link and launch it.

https://www.dymo.com/en-US/dymo-connect-for-desktop#


image


Step 2:

  1. Connect one end of Power supply to “DC Power connector” of the DYMO printer (located at back side) and other end to wall power supply.

  2. Connect one end of USB cable to “USB connector” of the DYMO printer (located at back side) and other end to “Host PC” where DYMO software is installed.


image


Step 3:

a) Put in the label roll inside the DYMO and Recommended label size for DYMO is 89mmx28mm (length x height) and below is the snap.


image


image


How to download inventory .CSV file from Dolphin Owner Portal Page?

Step 1: login to owner portal with your provided credentials from www.dolphinpos.com

Step 2: Go to “Inventory(1)” columns(2) Select “Name”, “Item Code” and “Price” fields (3) change “rows per page (4)” to desired value based on the inventory which you want to print.

image


image

Step 3: Select “Export data (5)” and tap on “CSV (6)” format. A file will be downloaded into your local host PC under “downloads” folder


image


image

Printing a Label for downloaded Inventory via DYMO printer

Step 1: Open Downloaded “DYMO connect” APP. Make sure DYMO label writer is “connected” and it will look like below snap.


image


Step 2: “Import data” option is available under “file” and also a quick access violet icon is available on the home screen (see below)


image

Step 3:

Select “import data(1)” ”Browse(2)””downloads(3)””tableExport(4)”

“Open(5)”


image


Step 4: Select “import(6)” button


image


Step 5: Select “Add (7)” button, Followed by “Barcode(8)”



image


Step 6: Make sure


image


You should see labels print like this.


image


Note: You can save the template of Label and can link it with the new


inventory .CSV file for the next prints.