Customer Display Setup with DolphinPOS APP
How to Setup Customer Display with DolphinPOS APP?
(Customer Display)
June-02-2020, Version V1.0
Contact information: support@dolphinpos.com
Index
Page#
Customer Display Setup with DolphinPOS APP
2-6
DolphinPOS User Guide
Page 1
Customer Display Setup with DolphinPOS APP
Customer Setup
Step 1: For this Setup you need two devices (one for Teller/Cashier display and
other for Customer display).
Step 2: And make sure Both the IPADs are connected to same WIFI network.
Step 3: On Customer display iPad , go to IOS “Settings “WIFI Tap on
Network to which it is connected. And note down the IP address
DolphinPOS User Guide
Page 2
Customer Display Setup with DolphinPOS APP
Open DolphinPOS APP, login with the user credentials and
go to” More” “Setup” “UDP Config͘”
Configure:
o IP Address: copy from above step3
o Port No:13000 (always Fixed)
Step 4: go to” More” “Setup” “General” and
Enable flags “is service server” and “enable customer display”.
DolphinPOS User Guide
Page 3
Customer Display Setup with DolphinPOS APP
Step 5: In the Teller /cashier iPad
Open DolphinPOS APP, login with the user credentials and
Go to” More” “Setup” “UDP Config͘”
Configure:
o IP Address: copy from above step3 (of customer display)
o Port No:13000 (always Fixed)
Step 6: go to” More” “Setup” “General” nd
Enable flags “is service client” and “enable customer display”.
DolphinPOS User Guide
Page 4
Customer Display Setup with DolphinPOS APP
Step 7: Now Close the DolphinPOS App on both the iPads. First turn ON
Teller/cashier iPad and then turn ON customer display iPad.
On Teller/cashier iPad: Go to register/sale screen
On customer display iPad: Go to “More” “Display screen”
DolphinPOS User Guide
Page 5
Customer Display Setup with DolphinPOS APP
Step 7: Once you start adding items in Teller/cashier iPad, and then should see
same items getting displayed on customer display iPad.
Now you are good to go!!
DolphinPOS User Guide
Page 6